Posted
over 10 years
ago
by
[email protected] (Rox)
After the 1.7.8 release we decided to move the blog to the NaroCAD website, so from now on you can follow us on narocad.com
|
Posted
over 10 years
ago
by
[email protected] (Rox)
After the 1.7.8 release we decided to move the blog to the NaroCAD website, so from now on you can follow us on narocad.com
|
Posted
over 10 years
ago
by
[email protected] (Rox)
After the 1.7.8 release we decided to move the blog to the NaroCAD website, so from now on you can follow us on narocad.com
|
Posted
over 10 years
ago
by
[email protected] (Rox)
Today we released NaroCAD 1.7.8 Beta:Generated and fixed a new wrapper set for OpenCascade 6.5.5Fixed Cut to depth for negative valuesReimplemented Cut through AllImproved Undo and Redo functionalityFixed Spline display and editingFixed display issuesYou can download it here
|
Posted
over 10 years
ago
by
[email protected] (Rox)
Today we released NaroCAD 1.7.8 Beta:Generated and fixed a new wrapper set for OpenCascade 6.5.5Fixed Cut to depth for negative valuesReimplemented Cut through AllImproved Undo and Redo functionalityFixed Spline display and editingFixed display issuesYou can download it here
|
Posted
over 10 years
ago
by
[email protected] (Rox)
Today we released NaroCAD 1.7.8 Beta:Generated and fixed a new wrapper set for OpenCascade 6.5.5Fixed Cut to depth for negative valuesReimplemented Cut through AllImproved Undo and Redo functionalityFixed Spline display and editingFixed display issuesYou can download it here
|
Posted
over 10 years
ago
by
[email protected] (Rox)
Today I fixed two bugs related to Fillet and Chamfer 3D which caused errors when performing two fillet operations on the same solid or when trying to cut through a solid resulted after Fillet or Chamfer was applied:I've also investigated Split and
|
Posted
over 10 years
ago
by
[email protected] (Rox)
Today I fixed two bugs related to Fillet and Chamfer 3D which caused errors when performing two fillet operations on the same solid or when trying to cut through a solid resulted after Fillet or Chamfer was applied:I've also investigated Split and
|
Posted
over 10 years
ago
by
[email protected] (Rox)
Today I fixed two bugs related to Fillet and Chamfer 3D which caused errors when performing two fillet operations on the same solid or when trying to cut through a solid resulted after Fillet or Chamfer was applied:I've also investigated Split and
|
Posted
over 10 years
ago
by
[email protected] (Rox)
Over the past few days I've worked on fixing some bugs found during testing (some that we had in the previous versions and some new):- Undo needed to be pressed twice to work- Undo after cut didn't show the sketch shapes that were used for cut- After
|