Open-BLDC

Settings | Report Duplicate

2

I Use This!

Inactive

Commits : Listings

Analyzed about 13 hours ago. based on code collected 1 day ago.

Commit Message	Contributor	Files Modified	Lines Added	Lines Removed	Code Location	Date
Apr 30, 2023 — Apr 30, 2024 Showing page 23 of 26 Search / Filter on:
Added STM32f101x-LQFP48 to the library. Preparing to replace the one in the schematic with a single piece.	Piotr Esden-Tempski	More...				almost 15 years ago
Moved the complete schematic to a subdirectory so that we can start creating independant projects for the logic board and power stage board.	Piotr Esden-Tempski	More...				almost 15 years ago
Added jumpers to make it possible to disconnect the opamps for testing. Also added a 2way jumper to the power supply of the bridge drivers to make testing that also easier.	Piotr Esden-Tempski	More...				almost 15 years ago
Added buffer opamps to I/BEMF and I_SENSE lines coming from the powerstage.	Piotr Esden-Tempski	More...				almost 15 years ago
Removed lowpass capacitors from the current sensors. It is not needed, we use the filter pin on the sonsors.	Piotr Esden-Tempski	More...				almost 15 years ago
Added 12V charge pump for bridge driver power supply.	Piotr Esden-Tempski	More...				almost 15 years ago
Replaced the 3v3 regulator with LP2992 to save space.	Piotr Esden-Tempski	More...				almost 15 years ago
Replaced usart connector with molex microblade.	Piotr Esden-Tempski	More...				almost 15 years ago
Moved shottkey voltage clamping diodes from bemf circuitry to the logic board to protect the I/BEMF lines.	Piotr Esden-Tempski	More...				almost 15 years ago
Removed brd file. It has to be remade from scratch anyways.	Piotr Esden-Tempski	More...				almost 15 years ago
Moved USB pullup behind the series resistor where it should be. Moved the pins of i2c back to the old version to match UAVP NG order. Renamed USB Connector to U3.	Piotr Esden-Tempski	More...				almost 15 years ago
Removed usb_disc circuitry. We don't really need it. Left only the pullup so that open-bldc gets detected as a full speed device.	Piotr Esden-Tempski	More...				almost 15 years ago
Moved LED1 and LED2 to pwm output pins for some fading fun.	Piotr Esden-Tempski	More...				almost 15 years ago
Removed HAL pins from the powerstage to logic connector. We really can do everything sensorless. Added 12V and powerstage id instead.	Piotr Esden-Tempski	More...				almost 15 years ago
Removed rectification diodes from current sensor circuitry.	Piotr Esden-Tempski	More...				almost 15 years ago
Added power supply circuit for the power stage.	Piotr Esden-Tempski	More...				almost 15 years ago
Cleaned up the power supply and reset circuitry of the STM32.	Piotr Esden-Tempski	More...				almost 15 years ago
Removed external oscilator. We do not need it. The maximum clock can be acheved also with the internal clock source.	Piotr Esden-Tempski	More...				almost 15 years ago
Reordered pins on the i2c connector. Added 3V3 and 5V to the usart connector.	Piotr Esden-Tempski	More...				almost 15 years ago
Reordered the crircuitry a bit. Designated Powerstage and Logic board circuitry parts.	Piotr Esden-Tempski	More...				almost 15 years ago
Fixed typo in copyright/license notice.	Piotr Esden-Tempski	More...				almost 15 years ago
BEMF and phase current are now selectable using smd jumpers.	Piotr Esden-Tempski	More...				almost 15 years ago
Moved the 3V3 regulator behind 5V regulator to decrese power usage.	Piotr Esden-Tempski	More...				almost 15 years ago
Replaced some more resistors with arrays to optimize space usage.	Piotr Esden-Tempski	More...				almost 15 years ago
Replaced the single resistors for LED's with a resistor array. (more such replacements to come) Replaced three of the LED's with one RGB LED.	Piotr Esden-Tempski	More...				almost 15 years ago
Replaced JTAG and I2C connectors with 1.27mm pitch edge connectors. Moved USART lines from the JTAG connector to it's own one.	Piotr Esden-Tempski	More...				almost 15 years ago
Replaced the strange 3v3, 5v voltage regulator with two single, more common, ones.	Piotr Esden-Tempski	More...				almost 15 years ago
Replaced bootstrap caps with tantals, 1uF with smaller packages, elko with two tantals (last one is mechanically more robust).	Piotr Esden-Tempski	More...				almost 15 years ago
Fixed the LED connections to the MCU.	Piotr Esden-Tempski	More...				almost 15 years ago
Replaced the edge connectors between logic and powerstage with 1.27mm single pinheaders. These will be put on each side of the logic board. This is mechanically more robust. The smaller pitch is also nicer. Reordered the connections also, to make routing easier. Still needs some thought.	Piotr Esden-Tempski	More...				almost 15 years ago

←
1
2
…
18
19
20
21
22
23
24
25
26
→