Project Summary
OpenSCB goal is to create a fully open source servo controller.
That means that we have designed a board with all the hardware to interface with classic RC servos, AX-12/AX-18 servos, openservo and more... It's using a powerful 32-bits micro-controller and it has an USB port for programming and control with a PC. The schematic and layout will be available and you will be able to use them and customize them as you need.
To go with this board, we have built an embedded software which let you use all the feature of the board. We tried to keep the design as flexible as possible so you should be able to reuse only the part you need from the software.
We are also developing a graphical interface for your computer to configure, calibrate and control the board.
In a Nutshell, OpenSCB...
Quick Reference
GNU General Public License v2.0 or later
Permitted
Commercial Use
Modify
Distribute
Place Warranty
Forbidden
Sub-License
Hold Liable
Required
Distribute Original
Disclose Source
Include Copyright
State Changes
Include License
These details are provided for information only. No information here is legal advice and should not be used as such.
This Project has No vulnerabilities Reported Against it
Did You Know...
-
...
in 2016, 47% of companies did not have formal process in place to track OS code
-
...
check out hot projects on the Open Hub
-
...
use of OSS increased in 65% of companies in 2016
-
...
compare projects before you chose one to use